| News Letters |
| SITI
spa (Italian Society of Industrial Transmission) |
|||||
MI ( WORM RIGHT ANGLE ) |
|||||
| -
RATIOS FROM 7.5:1 TO 100:1 RATIO - POWER HANDLING FROM .08 HP TO 40 HP - OUTPUT TORQUE FROM 3 ft/lbs. TO 2876 ft/lbs. |
|||||
· USAGE OF THE "MI" ( WORM RIGHT ANGLE ) WHAT TYPE OF APPLICATIONS MAY REQUIRE OR USE A RIGHT ANGLE REDUCER: |
|||||
|
1. BELT CONVEYORS 2. SHAKERS AND MIXERS FOR LIQUIDS 3. MACHINES FOR THE FOOD INDUSTRY(MINCING MACHINES, SLICING MACHINES) 4. TEXTILE INDUSTRY MACHINES 5. ROTATING FURNACES 6. MACHINERY FOR BRICKS, TILE AND CLAY 7. PRESSES OF ALL KINDS |
|||||
| MHL ( HELICAL INLINE ) |
|||||
|
- REDUCTION RATIOS UP TO 50:1 FOR VERSIONS WITH 2 STAGES - REDUCTION RATIOS UP TO 450:1 FOR VERSIONS WITH 3 STAGES - OUTPUT TORQUE FROM 26 ft/lbs. TO 4136 ft/lbs. - POWER HANDLING FROM .12 HP TO 60 HP - GEARBOX AVAILABLE IN ROUND BODY WHERE OUTPUT FLANGE REQUIRED |
|||||
|
** HOUSINGS ARE MADE IN CAST IRON G 25 ACCORDING TO UNI 5007 SPECIFICATION |
|||||
 |
THE MOUNTING POSITION OF THE REDUCER NEEDS TO BE KNOWN SO THAT THE LOAD, DISCHARGE AND LEVEL PLUGS CAN BE POSITIONED ACCORDINGLY. AND ALSO FOR BEARING LUBRICATION. | ||||
|
¨
THE FRAME SIZE ASSIGNED TO A HELICAL REDUCER IS DIRECTLY RELATED TO
THE OUTPUT SHAFT DIAMETER. i.e.: AN MHL20/2 WILL HAVE A 20mm DIAMETER OUTPUT SHAFT |
||||
|
¨ THE MHL REDUCERS ARE OFFERED IN TWO STAGES OF REDUCTION AND THREE STAGES OF REDUCTION | ||||
|
|||||
|
